The following problems occur in the BQ34Z100 demo test. 1. During the discharge process at 0℃ 1C, the SoC jumps directly from 100% to 0%, and the capacity almost becomes 0. The parameters are as ...

I've successfully configured the BQ76942 in my system and everything seems to be working fine. I've done this development using the EV2400. I would now like to OTP the part using the EV2400. I've ...

I am using ADS1263EVM-PDK. I want to measure current using differential input, voltage across shunt resistor( 1 ohm) . used INA0 and INA1 . i am using GUI tool. the full scale voltage is 5 v , taking ...

I read the result register for current measurement 1000 times. I found that I got negative value(unit: V), but it shouldn't be like this. here is our pin definition ...

Uploads a binary file to the Flash memory, via SPI, then clears the flag and resets Makes the jump to the aplication uint32_t transferAddress; // Address that is ...

I am using PIC32MZ2064DAS169i micro controller with DP83848 PHY. I have interfaced the DP83848 PHY driver library in MPLAB version 6.20 harmony library. When i am ...

Order of millivolts output swing to be fed into an ADC I'm using currently using TINA-TI to simulate the TIA, with the ultimate goal of producing a tangible physical version of the circuit in the ...

exactly same as here, but no way to complete the installation.I also tried to launch orLibraryDownload from the command line, just for test. Here is the result: then, nothing happens.

I am using TMS320F28335 DSP for Power electronic application. Following are the scenarios when PWM output is undesired (Short duration pulses): 1. During power on/off cycle. 2. When Power supply ...

I have a f28379d control card, I'm compiling it with CCS, I started with an example from empty_driverlib_project, I put together a code basically to send CAN messages, but the board behaves abnormally ...

I have take a look to the following TI documents C2000 F28P65x Series LaunchPad Development Kit TMS320F28P65x Real-Time Microcontrollers , Technical Reference Manual F28P65X Control Card and I would ...

We use gmake tool to build our AM62Ax project in windows operation system, sometimes the compiler report error log as the screenshot show,but if we try to rebuild the ...